The way to prolonging working time of crusher

The way to prolonging working time of crusher

 Crusher is an important equipment in the production of mine, many users are very concerned about how to extend the service life of the equipment. Want to have a long life of crusher equipment, the need to transform the user to transform the output, efficiency, life and other indicators, the following is a detailed introduction.

First, notice the source of the material. Blasting is the first step in the mining process, and the product is the raw material of the crusher. Good and bad quality of raw materials will directly affect the service life and efficiency of broken equipment, for the bulk of stone need to be processed for two times as raw material. Therefore, optimizing the blasting operation is a big factor to improve the life of the crushing equipment;

Second, the correct installation and commissioning of the crusher related spare parts. When the crusher rotating inertia of the large, hammer weight range, causing the rotor dynamic balance is not good, the rotor, bearings will have a certain degree of damage, the production equipment and will bring adverse. Therefore, the user must correctly install, debug the relevant spare parts, to ensure the normal operation of the equipment;

Third, regular inspection and maintenance work. Lubricating oil for equipment, crusher each lubricating point need operation personnel according to the actual situation of quantitative oil filling, to ensure the normal operation of the equipment. In the process of the management, the maintenance is better than the repair, and the inspection is better than the maintenance. Therefore, as long as the operator to do the daily inspection work, found that the problem is solved in time, then it will reduce the probability of equipment maintenance, repair;

Fourth, strengthen the management of spare parts. For production, equipment is the basis of the guarantee and premise, in the management of the equipment, the appropriate reserve of spare parts is essential. For example, reserve some parts, bow plate, hammer, hammer shaft etc.; Fifth, to ensure that appropriate technical innovation and innovation. If the user can do to the broken machine parts and production process, the appropriate technology improvement and innovation, so as to reduce production costs, improve product quality, extend the service life of the equipment.
http://www.zxyzp.com/solution/21.html

How To Maintain Cone Crusher In Cold Weather

How To Maintain Cone Crusher In Cold Weather

 Cold weather is not conducive to the operation of cone crusher, so users need to strengthen the maintenance and maintenance work in cold weather, the specific method is as follows:

 First, we should strengthen the daily inspection operations, and in each cone crusher equipment on a detailed record, to facilitate future inspection or fault analysis. Maintenance, replacement, daily use, production data, etc. .

The second, we should strengthen the maintenance work of cone crusher, and orderly. Improper maintenance is the main reason for the failure of the cone. In the daily work of traditional Chinese medicine in strict accordance with the maintenance process, in the cold weather, but should pay attention to the maintenance of the equipment. The user is best to develop a maintenance code, in strict accordance with the requirements of the implementation, to reduce the probability of leakage.

The third, intensify the management of the crusher equipment, to improve the existing maintenance and repair mechanism, the best to establish a sound maintenance mechanism. This helps to improve the efficiency of maintenance and for emergencies have good should be on measures, tracing the source of the equipment failure, from the record to find the reason, from the fundamental solution to the problem. Fourth: if the mechanical equipment needs a long time to spare, need to clean the lubricating oil and other liquid, etc. again, in the injection of new oil. In the cold weather, the effect of the lubricating oil in the cone crusher can be greatly reduced, so it is best to increase the number of oil to be changed. And completely clean the machine inside the residual liquid, to extend the service life of cone crusher.

http://www.zxyzp.com/solution/19.html 

Crushing Machine Industry Develop With The Modern Times

Crushing Machine Industry Develop With The Modern Times

Energy-saving and environmental protection, low-carbon economy are the most important task in today's social development. In order to realize the sustainable development of economy, the waste of resources must be reduced to a minimum, but also the comprehensive utilization of resources. As an important pillar of economic development, the crushing industry responds to the national environmental protection Policy, and actively according to market needs to change the mode of development.

 In order to adapt to the development of the times, the entrepreneurs of the broken machine have to optimize the production, management and other aspects of the production and management of the enterprise, so as to minimize the waste of resources and energy consumption, and to maximize the comprehensive utilization of resources. Many visionary entrepreneurs continue to improve the ability of independent research and development, and strive to develop energy-saving, environmental protection of green crushing equipment, and related companies to the road of sustainable development.

http://www.zxyzp.com/news/39.html 

What should be paid attention to the safety operation of the Crusher Equipment?

What should be paid attention to the safety operation of the Crusher Equipment?

Mine crushing machine operation have strict rules, first of all drivers must be rigorous training with the knowledge of safe operation, after after passing the certification exam. Drivers should be familiar with the business, including understanding of different types of broken machine performance and structure, understanding the basic causes of failure and troubleshooting, in the daily work to know how to maintain and maintenance, can be independent of the operation of the machine. During the work, the driver must wear the relevant work safety products, in the work of any person can not from the broken cavity of the above machine inside the machine.

Crusher equipment in to the time of material to strictly in accordance with uniform to the principle of material, otherwise the machine will because the feeding and the emergence of serious wear or even blocked. In the broken stone machine operation should pay attention to listen to the machine has no abnormal sound or movement, if there is abnormal sound and swing to immediately stop check until the fault is removed before it can continue to work. Drivers can not leave the scene during the machine operation, and can not let the people close to the machine. The lubrication of the machine need to refuel every day, the quality of the fuel and the quality should be strictly in accordance with the product specification to do. 

After a shift, Crusher equipment should be strictly checked, in particular those fasteners, see if it is not loose, because the mine crusher is a big vibration machine. Crushing machine to start and stop to in accordance with the provisions to do, start time and space machine is started, can not start in the material and the machine, because as the motor load is very big, very easy to burn out the motor. In the downtime is the first to make the material out of the end to stop, the purpose is to start the next time is an air engine start.

If you want to know about Mining Crusher Machines.you can click here: http://www.zxyzp.com/