Cause
of sudden decrease in working efficiency of jaw crusher
Jaw crusher can
be used as a rough crusher and medium crusher, the continuous improvement of
equipment structure and functions of the continuous improvement of the
construction industry, the mineral industry, and other mineral materials added
to the work has brought endless help. However, although the equipment has
gradually completed the production of high efficiency, but also often presents
many factors affect the production efficiency of equipment.
On the one hand,
the hardness and the composition of the processed materials do not conform to
the size of the equipment. High hardness of the material is more difficult to
break up, if it is more than the size of the equipment to break, not only the
quality of the output value of the material is low, but also the formation of
severe equipment, and then damage equipment. Therefore, in the process of
investment into the material should be strictly in accordance with the use of
manual, can’t be put into the excellent material. Material should be through
the drainage process, too many fine powder or material contains a lot of water,
the simple formation of fine powder or material adhesion in the broken cavity
wall, and then in the lining of the simple cause obstruction, greatly reducing
the output value. Therefore, strict material selection to produce power has a
vital impact.
On the other hand, the loss of jaw crusher
accessories or the low voltage of the operation will also reduce the efficiency
of the equipment. In the long period of use, the movable jaw and the bearing
between the bearing will be because of each other's wear and make the gap
between the more and more big, and then the bearing of the outer ring will
attack the corresponding rolling condition, and then drop the production power.
Therefore, the requirements of the operating personnel to see the device's
teeth, such as the onset of mobile image needs to adjust the relative position
of the jaw plate and bearing, in order to ensure the operation process of the
fixed. If the equipment and materials all normal but the displacement is still
low, the demand for the operation of the field of view, low voltage will
largely form the operation of the device, and thus the operating site of the
voltage regulation is high to the customary value of the device can be used to
complete the load demand, so that the safe and stable operation of the machine.
Jaw crusher in
the production process, in order to ensure the quality of products and quality,
the operator needs to be strictly according to the rules of the feeding, the
broken machine parts for regular maintenance, once found that the situation of
equipment operation can be reduced immediately to check and solve the problem.
Cause
of sudden decrease in working efficiency of jaw crusher
没有评论:
发表评论