Four Codes before Jaw Crusher Starting

Four Codes before Jaw Crusher Starting

   Jaw crusher, also known as jaw broken by a moving jaw and static jaw two jaw plate crushing chamber to simulate the movement of animals and two complete material crushing jaw crusher operation. After the customer after-sales installation, will try again to see whether the normal operation, so before starting what we need to pay attention to it? Customers need to know what skills it? Following on from the Zhongxin Heavy Industry explain.
   The first is in the boot should be preceded confirm that no one around the jaw crusher, no one may use to determine, safety first, we must pay attention, because it is the first time trial, what problems are likely to occur, they must ensure that personal Safety.
   The second is the boot can not rush to feed, should first observe whether a jaw crusher smooth operation, whether there is abnormal sound, no abnormal before feeding, if the boot into the material, the crusher is prone to running problems when we find when the problem, the material has entered, can not be removed, or mechanical damage, can also cause safety problems.
   Again is feeding should pay attention to uniform feeding, try to avoid feeding suddenly suddenly small, so easy to cause the belt to slip pressure mine; one should not put too much material, resulting in the accumulation of material. In general, the use of open mountain belt, feeding is not cause accumulation.
   Finally, after running every half hour to check for abnormal odor and ignition phenomena, because it is the first trial, the more we have to observe, if the first try without any problems, then the future can be assured to use, and if the jaw crusher Trial during any problems, you can contact Shanghai Shan Kai technical staff, we will be the first time for customers to solve the problem.

keywords:Jaw Crusher,Jaw Crusher Starting,Jaw Crushing

Link:http://www.zxpsjsb.com/news/39.html