Effective measures to reduce cone crusher Accident

        As a new cone crusher mining crusher equipment,Hydraulic cone crusher has a efficient production efficiency, uniform quality of the finished material crushing and stable operating performance and other advantages, the majority of industry wide application quickly. Today We will introduce effectively three measures to reduce cone crusher failure :
        1, good temperature control and management. Cone crusher in the normal work, the parts which have a normal operating temperature range, if the temperature of a component is abnormal, then it may cause damage to related components. Especially for the bearing parts, etc. If the temperature is too high must be carefully examined, usually inadequate lubrication situation extremely prone to burn bearing.
        2, good dust removal work. Due to the special nature of cone crusher machine production environment, in their work process will inevitably produce large amounts of dust and fine particles, if you do not dust, dust faults on equipment caused will be very large. Especially when these dust particles into the lubrication system, will greatly accelerate the wear of the device itself, affect the life of the crusher equipment, crusher equipment so easily result in failure. For such problems, we work in the daily production process not only to do the work of dust machinery and equipment, while the higher parts in the selection must pay attention to quality, in addition to lubricants also try to choose good quality impurities less variety.
        3, broken corrosive materials should take appropriate precautions. During use cone crusher, due to its wide range, it is likely to cause damage when broken acid and other corrosive materials to crusher components. Such materials typically required before proceeding broken into through the relevant drop acid, lowering the alkali treatment, or the use of special crusher related components. According to the specific circumstances of the respective needs and requirements of the production environment, as well as a combination of factors we need to consider the cost of inputs, etc. selection.

http://www.zxelsp.com/news/72.html