Introduction of crusher crushing principle

REVIEW: Shattered refers to the use of external force to the material broken into large particles process small particles of materials, the crusher is able to complete the material crushing equipment. Hourly production power and the corresponding reduction ratio is judged crusher is the main basic conditions are not large equipment
    Cone Crushing process refers to the use of force to large particles of material broken into small particles of materials, the crusher is able to complete the material crushing equipment. Hourly production power and the corresponding reduction ratio is to determine the crusher is mainly the basic conditions than large equipment, crusher crushing method of crushing due to different materials and different, see the following article in the introduction.
    Crushed material needs need to accept the crushing chamber of the crusher in a full range of extrusion, impact or shock to the liner material between each block, leading to a rapid shift slug; control of the material layer requires a certain solidity, from the crushing chamber inlet to the outlet, broken material was gradually increased. Want to block this direction was changed, so that the material layer may be a high-frequency strong vibration, resulting materials will shear and bending stresses, which is forcing the inner vibration grinding method. Large Crusher, since more material caused some solidity to meet the increasing crushing force conditions, resulting in a large to a certain extent to achieve selective crushing.
    All in all, according to the characteristics of different materials need crushing, crushing method chosen is not the same. Friends want to achieve the best user crushing effect, you need to select the appropriate method of crushing material characteristics.

http://www.zxpsjsb.com/news/43.html