what to do with Jaw crusher in stock ?

     Jaw crusher mining industry is the most commonly used crushing equipment, mainly used for rough broken, but in normal operation, there will be no material circumstances crusher, jaw crusher card stock stuck atop mine, because jaw crusher in the course of work, the higher the moisture content of the ore material into the crushing cavity, crushing machine materials containing water broken into smaller pieces, into pieces of material has a certain viscosity, it will stick to each other in together, and stuck in the crushing cavity between the two jaws, causing the card material phenomenon; there may be broken material in the mixed rare earth have a greater viscosity, so that the material to be glued to a block in the crushing cavity , the occurrence of card material phenomenon.

    In view of this situation, you can try the following methods:
    1, can be taken pre-screening, pre-washing, ore moisture control method, but some are more difficult to process ore;
    2, can also be pre-screening, and appropriate to increase the port of discharge, and increase the efficiency of the material;
    3, the spindle speed can also be reduced, to increase the discharge opening;
    4, you can also adjust the discharge port, not peace but the angle;
    On the other hand, jaw crusher before use, should be clear that the parameters of the crusher to use, especially for the nature of the material requirements, according to the crusher for material requirements into suitable material, if it does not crusher process requirements, such as temperature is too high or too much water, you can make the appropriate processing, the material as much as possible at or near the crusher requirements.

http://www.zxpsjsb.com/news/52.html